AM8800 Servomotores sincronos higienizables

AM88xx | Stainless steel servomotors

Based on the AM8000 technology, the AM8800 series has a stainless steel housing that is designed according to the EHEDG guidelines in Hygienic Design. The AM8800 is ideally suited for use in the food, pharmaceutical and chemical industries.

The windings of the AM8800 motors are implemented using salient pole-wound technology. This gives rise to a high copper space factor. Due to the high slot space factor, high continuous torques can be attained. The fully potted stator provides for a thermally ideal transition of the winding to the housing. A further positive consequence of this is the mechanical protection of the winding wires against vibrations.

Since the housing and motor shaft are manufactured from scratch-proof stainless steel AISI 316L, no corrosion creep or damage to the paint finish is possible. The motors are manufactured as standard with IP 69K protection, allowing the use of steam pressure cleaners. An optional sealing air connection to prevent the formation of condensation is also available. The cable gland also has a hygienic design. The lubricants used are certified food-safe (FDA).

One Cable Technology (OCT)

With the servomotors of the AM8000 series the feedback signals are sent directly along the conductor to the power supply so that the power and feedback systems are combined in a single motor connection cable. With the use of OCT, the information is sent reliably and without interference through a digital interface. Since a cable and plug are omitted at both the motor and controller end, the component and commissioning costs are significantly reduced.

http://www.beckhoff.com/english/drive_technology/am88xx.htm?id=5569118881005

Este producto ha sido asignado por el expositor a la categoría:
AUTOMATIZACION Y ROBÓTICA / MANIPULACION DE PIEZAS Y HERRAMIENTAS / MANIPULACION DE PIEZAS Y HERRAMIENTAS

Este producto es presentado por el expositor: BECKHOFF