ZVH-Gen6 MOVING COLUMN MACHINING CENTERS - On show
The most important improvement of these new ZVH MULTIPROCESS and ZVH EXTREME machining centers is the 20% larger work envelope for 5-axis machining. IBARMIA engineers have achieved this by reducing the distance between the spindle nose and the swivel axis of the spindle which is now only 300 mm. If the spindle is positioned horizontally, the spindle nose can be lowered to 250 mm above the work table, compared to 375 mm in the previous generation of the Z SERIES. At the same time, the maximum workpiece weight of up to 2000 kg/m² remains as high as users appreciate in IBARMIA.
Magazine holds up to 60 tools
Another important change can be found in the tool magazine: It is now located to the side of the machining area instead of behind the moving column. For even more tools, IBARMIA offers the INDUNOOR M magazine.
It is also possible to exchange the tools in the magazine even during machining time.
Dynamics of the moving column increased
The changed position of the tool magazine enables even more improvements for the new generation of machining centers. The moving column is stiffer and moves more dynamically. The additional acceleration of approximately 0.5 m/s² represents an advance of 30%.
The new generation of ZVH MULTIPROCESS and ZVH EXTREME machining centers offers further advantages in terms of ease of maintenance and ergonomics. For example, pneumatics and hydraulics are combined in one place and easily accessible through a door. IBARMIA has also lowered the table height by 50 mm, which improves ergonomics for operators.
Reduced footprint facilitates transport
In addition to these improvements, the footprint has been reduced. The width of the machining center has been reduced by 500 mm. This not only simplifies installation in the production hall, but above all transport: a special heavy-duty transporter is no longer required to bring the machining center to its destination.
At the same time, with the new generation IBARMIA has taken the opportunity to standardize the Z SERIES machining centers to a greater extent. This means faster construction and cost reductions, which in turn make the machines more economically interesting for customers.
This new product belongs to the exhibitor: IBARMIA
Other new products of this exhibitor
