LARA

Complete feeding lines

These complete lines branch out in 2:  – The “long” traditional configuration: Decoiler, straightener and CNC feeder. – The “compact or short” configuration with just 2 machines: Decoiler and straightener-feeder. (Other...

Double vertical decoilers

For coil can be up to 15,000 kg and 1,500 mm of bandwidth over expandable mandrel. Decoilers can be supplied with or without motor , with mechanical or hydraulic expansion, single or double mandrel, optional hold-down arm system, with...

Electronic CNC feeders

For metal strip coils with widths from 110-1700 mm for maximum cross section of 3000 mm² , covering a wide range of solutions for sensitive materials and thicknesses under 1.0 mm and also for metal stips till 10 mm and including high yield...

Embossing machine

Machines that contain rollers with a special engraving for aluminum embossing and incorporate a lifting system using hydraulic cylinders that allows maneuvering to insert the strip. They also have a high-low stop for the regulation of the opening...

Flatteners

The flatteners consist of passing the strip through a straightening roller train producing a series of elastic deformations on the strip that eliminate the tensions caused by the winding of the coil, facilitating the entry into the deformation...

Horizontal palet decoilers

The horizontal palette decoilers made by LARA are the ideal solution for unwinding coils of delicate and light materials of strip thicknesses up to 2 mm and widths up to 230 mm. This machines allow complete unwinding of multiple coils stacked...

Slitting compact line

Combined slitting line that allows the longitudinal cutting of coils, the transverse cutting of formats or a combination of both. It brings together in one very compact unit, the material straightening system, the advance system with precision...

Special presses

80Tn eccentric press for special applications.

Straighteners

The roll straighteners cover a range of bandwidths from 200 to 1700 mm and thickness from 0.1 to 12 mm with a maximum cross-section of 4,500 mm² and adaptable according to the material to be processed: steel, stainless steel, high yield...

Straighteners-Feeders

The straighteners-feeders are a combined unit which cover a range of bandwidths from 200 to 1700 mm, thickness from 0.1 to 12 mm with a maximum cross-section of 4,500 mm² and adaptable according to the material to be processed: steel, stainless...

Vertical decoilers

Vertical decoilers for coil can be up to 15,000 kg and 1,500 mm of bandwidth over expandable mandrel. Decoilers can be supplied with or without motor , with mechanical or hydraulic expansion, single or double mandrel, optional hold-down...